25 %
Save $660.01

Helios -24 Light 240 Volt Controller W/ Dual Trigger Cords

$1,999.94

Lead Time: 3-5 Business Days

SKU: 74085

Description

Helios -24 Light 240 Volt Controller W/ Dual Trigger Cords

This controller will operate twenty-four (24) HID lights at 240 volts. The only lighting controllers featuring industrial-grade ballast rated relays. Two (2) trigger cord sets activate lighting controller via external timers. Sequenced lighting delays for each light bank. All duplex outlets have circuit breaker protection. NEMA 6-15 UL Listed power outlets. 150 Amps input power/120 Amps output power/240 Volts/60 Hz./24,000 Watts.

Features

Helios 17 controls up to 24 1000 Watt HID lights at 240 volts
The only lighting controllers featuring industrial-grade Allen Bradley circuit breakers and ballast rated relays
Two trigger cord sets activate lighting banks via external timers
Sequenced lighting delays for each light bank
ETL listed for use in commercial applications
NEMA 6-15 UL listed 240 VAC power outlets
150 Amps/240 Volt = Input power
120 Amps/240 Volt = Output power
60 Hz.
Single phase power required
Manufactured in the USA!

Controller Specifications:

– Size = 24″H x 28″W x 5.5″D
– Weight = 40 lbs.
– Input Amperage = 150 Amps
– Output Amperage = 120 Amps
– Voltage Input = 240 VAC
– Voltage Output = 240 VAC
– Relay Coil Voltage = 120 VAC
– Timing Module Voltage = 120 VAC
– Maximum Wattage = 24,000 Watts (1000 watts per outlet)
– Hertz = 60Hz
– Electrical Relay Operations = 100,000 Cycles
– RoHS compliant = Yes
– Storage Temperature = 32°F (0°C) to 135°F (57°C)
– Operating Temperature = 40°F (5°C) to 125°F (52°C)

Instructions for Operation

– The Helios® 17 must be installed by a licensed electrician or you will void your warranty.
– DO NOT install this controller by yourself. High voltage is dangerous!
– Securely mount your Helios® 17
– A UL listed minimum 150 Amp circuit breaker must be installed in this application.
– A 240 VAC Disconnect Service must be provided by the customer.
– Connect your incoming 240 Volt power to the terminal block located at the bottom center of the Helios® 17.
– Attach the ground wire to the “Grounding Lug” on the bottom right hand side of the Helios® 17.
– Verify that all your wiring connections are tight and that no loose wires are exposed.
– Plug your ballasts into the NEMA 6-15 outlets on the right and left side of the Helios® 17 lighting controller.
– Securely attach the front panel of the Helios® 17 to avoid potential shock or injury before initiating power to controller.
– Plug relay trigger cord sets into an external 24 hour appliance timer(s).
– Make sure that all wires and cables have been properly secured.
– Activate single phase 240 volt/60 Hz. power to the Helios® 17 lighting controller.
– When the relays are activated via the external 24 hour timer, you will hear a CLUNK sound and your l – Lights will come ON.
– Your Helios® 17 will now control your lights at the desired settings until the power is defeated.

Warranty

3 year warranty

Additional information

Weight 23.75 kg
Dimensions 76.84 × 73.02 × 20.32 cm

Attachments


No attachments found

Reviews

There are no reviews yet.

Be the first to review “Helios -24 Light 240 Volt Controller W/ Dual Trigger Cords”

Your email address will not be published.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information: